Iscar Adds Their Latest Innovations To A Extensive Line Of Successful Hole Generating Solutions

Iscar recently released several different drilling innovations to meet their customers needs. These most recent products are Sumocham Drill, DR-DH and Deep Drills. Drawing off of their expertise Iscar has come up with brand new and innovative ways to enhance productivity for the end user. Here is a little bit about these brand new products, and how they will benefit the end user of these products.

SUMOCHAM Drills

ISCAR's new SUMOCHAM drill family is an advanced progression of the very outstanding CHAMDRILL and CHAMDRILLJET drill families. The drill features twisted coolant nozzles with indexable drilling heads which are available in different head configurations for a variety of material groups. SUMOCHAM drills can be used on milling centers or lathes.

SUMOCHAM incorporates four different standard drill head geometries, designed for unsurpassed performance and high reliability. The drill head is built with a sharp cutting edge and polished flutes. SUMOCHAM drilling heads are available in the diameter range of 8 to 25.9 mm. The drill head has ground flutes for smooth, uninterrupted chip flow and a ground gash for enhanced penetration.

The drill shank design is according to DIN 9766 standard, with obtainable drilling depth to diameter ratios of 1.5XD, 3xD, 5XD and 8xD. All drill bodies showcase coolant through holes. The accurate cylinder added to the clamping portion increases durability and reduces internal stresses. The rotation stopper planes are accurately ground, which improve the control on the drilling head position and support, increasing tool performance and life. ISCAR's innovative SUMOCHAM drill line will allow for longer tool life and higher productivity.

DR-DH Deep Drills

DR-DH drills can acquire drilling depth-to-diameter ratio of 7XD and up. Constructed to be implemented on standard horizontal milling centers, turning, and multi-task machines. Use of supplemental machine and setup can be avoided. They will be available as semi-standard item in a diameter range of 25.4 to 69.5 mm (1.00 - 2.73").

Two versions will be available:
A Single Flute DR-DH-31.65-0350NC-2FS is a very rigid tool with a patented chip gullet design. It was tailored for easily cut materials like cast iron and low alloyed steel.

A Double Flute DR-DH-31.65-0350NC-2FD has a double chip gullet for better chip flow. It was tailored for drilling gummy materials like non-alloyed steel and high temperature alloys.

ISCAR DEEP HOLE DRILLS

With ISCAR's innovative solid carbide deep hole drills, you can safely drill up to 22 times diameter and arrive bottom10% faster than with other solid carbide drills - and six times faster than a HSS drill. This capability can speed up many high-volume operations. The deep-hole drilling station no longer has to slow down a transfer line or stop it completely because a drill broke.

Different target applications encompass deep holes for automotive, hydraulic blocks and die & mold work. A mixture of features help the twist drills to cut faster, straighter,deeper, last longer and discharge chips more surely. A special high-strength core creates a more long lasting drill point and allows for deeper flutes, enlarging the exit path for chips.

The drill tip themselves have a 140 positive-point, four-margin design to maintain the edge, cut down thrust forces and aid centering and tracking. A post-coat polishing measure on the flutes, margins and cutting edges reduces friction and torque that can easily snap a drill.

The latest drills are available in normal diameters ranging from 5 to 10 mm, in 20 and 22 length to diameter ratios. Special sizes are attainable on request. All are built of IC908, a 10% cobalt submicron carbide grade, and comes with a TiAlN PVD coating, and can be refurbished.

These are just some of the latest innovations coming from Iscar.

A Handful Of Upgrades In Carbide Inserts Provided By Iscar Through The Former Decade
Iscar is announcing a brand new unique milling system that includes tangential, clamped, butterfly-shaped LNKX carbide inserts. The butterfly-shaped insert has meaningful advantages compared to the current flat, square shapes. The new geometry has more cutting edges, positive rake face, decreased cutting forces resulting in better performance.

Revolutionary End Mills Coming From Iscar Will Raise Productivity While Reducing Costs
Manufacturers and die & mold shops can banish chatter problems in numerous milling operations with Iscar's new Chatterfree end mills. The cutters' variable-pitch flute pattern eliminates harmonic vibration, the primary source of chatter. This enables faster cutting and finer finish in rough or finish slotting, shoulder milling and cavity milling.

Utterly New Rover Manufacturing Jobs
Britain's economy is trying to recover from the impact caused by the global economic recession through new Land Rover manufacturing jobs.

What Car Engineering Careers Do.
Automotive engineers who have years of experience in the automotive industry have the ability and skills of overseeing new projects and product development.